# Identchannels with chnset not updating colour

**URL:** <https://forum.cabbageaudio.com/t/identchannels-with-chnset-not-updating-colour/1416>\
**Category:** Cabbage Stew\
**Created:** [28 April 2019 14:48 UTC](https://forum.cabbageaudio.com/t/identchannels-with-chnset-not-updating-colour/1416 "2019-04-28T14:48:32Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Syl\_Morrison](https://forum.cabbageaudio.com/user_avatar/forum.cabbageaudio.com/syl_morrison/32/1126_2.png) [@Syl\_Morrison](https://forum.cabbageaudio.com/u/Syl_Morrison)\
**Post date:** [28 April 2019 14:48 UTC](https://forum.cabbageaudio.com/t/identchannels-with-chnset-not-updating-colour/1416/1 "2019-04-28T14:48:32Z")

</div>

Really hope this isn’t something I’m going to look at in like ten minutes and be like “I wish there was a delete button”!  
So I don’t know if I’m misunderstanding the use, but say I have a groupbox which starts off pink, and I want to make it black when a button is pressed, something like

`groupbox text(sad_reacts_only), bounds(110, 310, 100, 320), colour("pink"), fontcolour("teal"), identchannel("pls"),`

And within an instrument I try to set this (this is in a conditional but for simplicities sake):

```
;formatting message so there's a space after the comma above, and end with a comma for future additions
chnset " colour(0, 0, 0), ", "pls"

```

Should that not be expected to update the groupbox background colour to black? Might be missing something rly stupid, but a similar thing was happening with chnsetting “visible”, which I ended up getting around by chnsetting “bounds” instead!

(Edit: audio settings are fine, that was throwing me in the link slider days)

---

<div class="post-metadata">

**Author:** ![rorywalsh](https://forum.cabbageaudio.com/user_avatar/forum.cabbageaudio.com/rorywalsh/32/165_2.png) [@rorywalsh](https://forum.cabbageaudio.com/u/rorywalsh)\
**Post date:** [28 April 2019 19:14 UTC](https://forum.cabbageaudio.com/t/identchannels-with-chnset-not-updating-colour/1416/2 "2019-04-28T19:14:29Z")

</div>

> [@Syl\_Morrison](#):
>
> (Edit: audio settings are fine, that was throwing me in the link slider days)

He says with confidence..

but…

..we recently discovered a bug with `identchannel()`, when the sampling rate is anything but 44100. When I run your example with my audio device SR set to 44100 it works fine. Note this issue is present in DAWs too. I should get a chance to fix it this week. Watch this space..

---

<div class="post-metadata">

**Author:** ![Syl\_Morrison](https://forum.cabbageaudio.com/user_avatar/forum.cabbageaudio.com/syl_morrison/32/1126_2.png) [@Syl\_Morrison](https://forum.cabbageaudio.com/u/Syl_Morrison)\
**Post date:** [28 April 2019 19:20 UTC](https://forum.cabbageaudio.com/t/identchannels-with-chnset-not-updating-colour/1416/3 "2019-04-28T19:20:19Z")

</div>

Ayyyyy that’s perfect thank you so much, for some reason with my interface it doesn’t give me an option to use 44.1khz so i stuck with 48k because I’m a lazy boi didn’t realise it would affect it!  
Lemme know when the new patch is done!