# Multiple instrument inputs

**URL:** <https://forum.cabbageaudio.com/t/multiple-instrument-inputs/4798>\
**Category:** Csound Noobs\
**Created:** [14 May 2025 16:55 UTC](https://forum.cabbageaudio.com/t/multiple-instrument-inputs/4798 "2025-05-14T16:55:27Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Bryan\_T](https://forum.cabbageaudio.com/user_avatar/forum.cabbageaudio.com/bryan_t/32/5680_2.png) [@Bryan\_T](https://forum.cabbageaudio.com/u/Bryan_T)\
**Post date:** [14 May 2025 16:55 UTC](https://forum.cabbageaudio.com/t/multiple-instrument-inputs/4798/1 "2025-05-14T16:55:28Z")

</div>

I usually build my plugins with either mono-in/stereo-out or stereo-in/stereo-out. That works great as either an instrument plugin or on a stereo bus.

But what if I want several mono inputs and stereo output? I’d like to manage the mono signals in the plug-in for muting, side-chaining, or whatever. How should I think about this in Logic?

---

<div class="post-metadata">

**Author:** ![rorywalsh](https://forum.cabbageaudio.com/user_avatar/forum.cabbageaudio.com/rorywalsh/32/165_2.png) [@rorywalsh](https://forum.cabbageaudio.com/u/rorywalsh)\
**Post date:** [14 May 2025 19:47 UTC](https://forum.cabbageaudio.com/t/multiple-instrument-inputs/4798/2 "2025-05-14T19:47:03Z")

</div>

You should set the inputs and outputs separately, `nchls/nchnls_i`. And I’m afraid they should always be grouped in pairs. Check out [this](https://forum-next.cabbageaudio.com/t/changes-to-multichannel-setup/2429/6) post. Here is a simple sidechain compressor example that @Gerbo and I used to test this feature a few years back. Hopefully it still works 🤞 (I see some of the identifiers need updating to camelCase, but it should still work Ok).

```
<Cabbage>
#define SLIDER_APPEARANCE trackercolour("DarkSlateGrey"), textcolour("black") 
form caption("Sidecomp") size(440,530), pluginid("FSR0") style("legacy"), sidechain(2)
image bounds(0, 0, 440, 228), outlinethickness(6), , colour(128, 128, 128, 255) filmstrip("", 0, "vertical")
rslider bounds( 80, 10, 70, 70), channel("att"), text("Attack"), range(0,1,0.01,0.5), $SLIDER_APPEARANCE
rslider bounds(150, 10, 70, 70), channel("rel"), text("Release"), range(0,1,0.05,0.5), $SLIDER_APPEARANCE
rslider bounds(220, 10, 70, 70), channel("ratio"), text("Ratio"), range(1,300,10000,0.5), $SLIDER_APPEARANCE
rslider bounds(290, 10, 70, 70), channel("look"), text("Lookahead"), range(0,1,0.01,0.5), $SLIDER_APPEARANCE
rslider bounds(360, 10, 70, 70), channel("gain"), text("Gain"), range(-36,36,0), $SLIDER_APPEARANCE
rslider bounds(82, 88, 70, 70), channel("LowKnee"), text("LowKnee"), range(0, 120, 60, 0.5, 0.001), $SLIDER_APPEARANCE textcolour(0, 0, 0, 255) trackercolour(47, 79, 79, 255)
rslider bounds(220, 88, 70, 70), channel("HighKnee"), text("HighKnee"), range(0, 120, 60, 0.5, 0.001), $SLIDER_APPEARANCE textcolour(0, 0, 0, 255) trackercolour(47, 79, 79, 255)
label bounds(-24, 146, 420, 13), text("Soft Knee"), fontcolour(0, 0, 0, 255) 
csoundoutput bounds(2, 230, 432, 295)
checkbox bounds(198, 174, 213, 40), channel("bypass"), text("Send sidechain to output")
</Cabbage>
<CsoundSynthesizer>
<CsOptions>
-d -n
</CsOptions>
<CsInstruments>
nchnls = 2
nchnls_i = 4 ;main inputs(chan 1, chan 2) and sidechain(chan 3, chan4)
ksmps = 32
0dbfs = 1

instr 1

    print nchnls 
	print nchnls_i
    a1 inch 1 ;main in left
    a2 inch 2 ;main in right or sidechain input if logic is running in dual mono
    a3, a4 init 0 ;declare variables for sidechain inputs

    if nchnls_i == 3 then
        a3 inch 3 ;sidechain left
    endif
    if nchnls_i == 4 then
        a3 inch 3 
        a4 inch 4 ;sidechain right	
    endif 

						
																		
    kthresh = -1000000000			
    kLowKnee	chnget "LowKnee"
    kHighKnee	chnget "HighKnee"
    katt chnget "att"
    krel chnget "rel"
    kratio chnget "ratio"
    kgain chnget "gain"
    klook = 0.00  						
    klook init 0.00							
    if changed(klook)==1 then							
    reinit REINIT										   
    endif
    REINIT:

    if nchnls_i == 2 then
        aC_L compress a1, a2, kthresh, kLowKnee, kHighKnee, kratio, katt, krel, i(klook)	; compress mono
        aC_R compress a1, a2, kthresh, kLowKnee, kHighKnee, kratio, katt, krel, i(klook)
    elseif nchnls_i == 4 then
        aC_L compress a1, a3, kthresh, kLowKnee, kHighKnee, kratio, katt, krel, i(klook)	; compress stereo
        aC_R compress a2, a4, kthresh, kLowKnee, kHighKnee, kratio, katt, krel, i(klook)
    endif
    
    aC_L	*=	ampdb(kgain)								
    aC_R	*=	ampdb(kgain)

    if nchnls_i == 1 then 
        outs aC_L, aC_L
    elseif nchnls_i == 2 then
        outs aC_L, aC_R
    elseif nchnls_i == 4 then
        if chnget:k("bypass") == 0 then
            outs aC_L, aC_R
        else
            outs a3, a4
        endif
    else
        outs aC_L, aC_R
    endif

    endin

</CsInstruments>
<CsScore>
i1 0 [60*60*24*7] 
f0 z
</CsScore>
</CsoundSynthesizer>

```

---

<div class="post-metadata">

**Author:** ![Bryan\_T](https://forum.cabbageaudio.com/user_avatar/forum.cabbageaudio.com/bryan_t/32/5680_2.png) [@Bryan\_T](https://forum.cabbageaudio.com/u/Bryan_T)\
**Post date:** [14 May 2025 21:58 UTC](https://forum.cabbageaudio.com/t/multiple-instrument-inputs/4798/3 "2025-05-14T21:58:24Z")

</div>

That all makes sense. What I’m hung up on is how Logic will interface with this. Plugins seems to expect either a mono or stereo input, but I’m probably missing something.

---

<div class="post-metadata">

**Author:** ![Bryan\_T](https://forum.cabbageaudio.com/user_avatar/forum.cabbageaudio.com/bryan_t/32/5680_2.png) [@Bryan\_T](https://forum.cabbageaudio.com/u/Bryan_T)\
**Post date:** [14 May 2025 22:04 UTC](https://forum.cabbageaudio.com/t/multiple-instrument-inputs/4798/4 "2025-05-14T22:04:33Z")

</div>

I guess a side chain input is available in Logic, but I’m thinking about a case where I have all inputs available for processing.

Maybe I create a multi-channel bus (quad, 5.1, 7.1 or whatever) and use the plug-in on that bus, outputting to stereo? That seems kludgey, but might work.

---

<div class="post-metadata">

**Author:** ![rorywalsh](https://forum.cabbageaudio.com/user_avatar/forum.cabbageaudio.com/rorywalsh/32/165_2.png) [@rorywalsh](https://forum.cabbageaudio.com/u/rorywalsh)\
**Post date:** [15 May 2025 08:58 UTC](https://forum.cabbageaudio.com/t/multiple-instrument-inputs/4798/5 "2025-05-15T08:58:11Z")

</div>

You can set any arbitrary number of inputs/outputs as you like. Different hosts will deal with these in their own way. But under the hood it should all work the same way. In reaper, for example, I don’t think I’ve ever seen the term _sidechain_ applied anywhere. You simply select the inputs you wish to access and do as you wish with them. I’m not sure about Logic, but I assume it can handle any number of inputs just as well. Give it a whirl and let us know your findings 👍 FWIW, most of the work done on the sidechain feature was with done with Logic in mind so it should behave pretty well there.
